Hardi ALPHA 2000, Инструкция

Страница: 21 / 52

21
ALPHA
1. Raising of the boom
2. Lowering of the boom
3. LEFT hand side
boom tilt UP
4. LEFT hand side
boom tilt DOWN
5. RIGHT hand side
boom tilt UP
6. RIGHT hand side
boom tilt DOWN
7. EC operating unit
ON / OFF
8. Slanting of the boom
Folding of the boom
When folding the boom, please carry out the following
procedure:
1. Raise boom lift
1 to upper position.
2. Check that pendulum slanting control is levelled to
middle position - if not correct by activating switch 8 .
3. Lock pendulum locking device by pushing switch H
upwards.
4. Fold outer sections, A and C .
5. Lift up right and left hand side boom by activating
right and left boom tilt, 3 and 5 .
6. Fold inner sections by activating switch B .
7. Lower boom lift, F , until boom rests on rear transport
brackets.
8. Lower right and left boom side until they touch the
front transport brackets by activating boom tilt 4 and 6 .
ENSURE THAT THE BOOMS ARE CLEAR FROM THE
TRANSPORT BRACKETS BEFORE UNFOLDING IS
PROCEEDED.
Use of rinsing tank and rinsing nozzles
The incorporated 185 l rinsing tank can be used for two
different purposes.
A
. In-field diluting of remaining spray liquid residues in
the spraying circuit for spraying the liquid in the field, be-
fore cleaning the sprayer:
1. Empty the sprayer as much as possible. Turn the agi-
tation off and spray till air comes out of all nozzles.
2. Remove the tank filter basket.
3. Turn suction valve towards rinsing tank.
4. Turn pressure valves towards rinsing nozzle.
1 3 5
2 4 6
8
7
C H B A
H C A B B
A. Unfolding/folding of the left outer section.
B. Unfolding/folding of the inner sections.
C. Unfolding/folding of the right outer section.
H. Pendulum locking device.
Unfolding of the boom
To unfold the boom, please carry out the following pro-
cedure:
1. Push boom lift switch 1 upwards to lift the boom
clear of the rear transport brackets.
2. Lift the right and left boom parts by activating the
boom tilt function, switch 3 and 5.
3. Push switch B to unfold the inner sections completely.
4. Push switch A and C to unfold outer sections com-
pletely.
5. Push switch 2 downwards to lower the boom to
approx. 50 cm above crop or ground level.
6. Unlock the pendulum suspension by pushing switch
H downwards.
IMPORTANT! The folding functions must only be oper-
ated when sprayer is stationary. The functions in the pi-
lot lever can be operated during spraying. Wrong opera-
tion will damage the boom!
T060-0006
T060-0028
T060-0031
T020-0010
T020-0009