Hardi ALPHA 2000, Инструкция

Страница: 11 / 52

11
ALPHA
Air conditioning temperature control
This switches on the air conditioning and adjusts the
temperature in the cab. The air conditioning does only
work when fan switch is switched on as well. See para-
graph “Air conditioning”
Cab heater / defroster
Controls the in-cab temperature.
Cab air flow louvres
Adjustable in all directions.
Spraying pump switch
Engages and disengages the diaphragm spraying
pump. A second switch is located on the left hand side
of the sprayer under the platform.
Hydrostatic transmission control lever
To start the engine, the lever must be in neutral posi-
tion. Move the lever forward to drive forward and move
backwards to reverse.
Front wheel motors fast / slow switch
Controls the front wheel motors speed and torque
mode. See section “Driving”.
Rear wheel motors fast / slow switch
Controls the rear wheel motors speed and torque mode.
Se section “Driving”.
Control lamp, realignment of front wheels
(4-wheel steering only)
When the front wheels are aligned with the chassis this
lamp lights.
Control lamp, realignment of rear wheels
(4-wheel steering only)
When the rear wheels are aligned with the chassis this
lamp lights.
Control lamp, 4-wheel steering, (if fitted)
When the 4-wheel steering is set in automatic mode this
lamp lights.
Pedal, 4-wheel steering (if fitted)
When this pedal is depressed the 4-wheel steering is
active and front and rear wheels will steer when the
steering wheel is turned.
Switch for Electronic Anti-Spin System,
SAPE (if fitted)
Indicates that SAPE is engaged.
Use of cab heating
The cab is heated by means of the engine coolant. The
warm air is distributed via the adjustable air flow louvres
placed in the floor of the cab and will ensure effective
heating of the cab and defrosting of the windscreen.
• Adjust the air volume by turning the 3-speed fan
control
• Open and adjust the air flow louvres
• Adjust the temperature on the heater temperature
control
Use of air conditioning (if fitted)
The air conditioning evaporator unit is placed in the
compartment under the seat and conditioned air is let
into the cab via the air flow louvres.
Use of the air conditioning:
• Set the heater temperature control to minimum
• Adjust the air conditioning temperature control to the
desired temperature
• Adjust the air volume by turning the fan speed control
• Adjust the air flow louvres to obtain comfortable air
circulation in the cab
• Do not cool the cab air too much below outside tem-
perature. A huge temperature difference will affect
your physical well-being.
IMPORTANT! Always keep the cab door closed when
the air conditioning is switched on.
To demoist the windows rapidly, the air conditioning and
heater can be operated simultaneously to lower cab air
humidity.
IMPORTANT! To keep the air conditioning properly
working, it must be operated at least once a month for
minimum 10 min. Circulation of the refrigerant will lubri-
cate all seals and prevent escape of the refrigerant.
Consult with your HARDI dealer if the problem contin-
ues, and have the system inspected by a specialist in
air conditioning systems. AC refrigerant is not environ-
mental friendly. Have leakages mended instantly.
Windscreen wiper/washer
Depress the 2-speed wiper switch to operate the wiper
To wash the windscreen, press the button using screen
wash from the reservoir