Hardi ALPHA 2000, Инструкция

Страница: 10 / 52

10
ALPHA
Adjustable air flow louvres
Can be adjusted to obtain optimal air circulation in the
cab.
Console for HARDI PILOT
See separate manual for operating instructions for
HARDI PILOT.
Boom function switches
For operation, see section “operating the boom”.
4-wheel steering switch
For operation see section “driving”.
Engine throttle lever
To be used for maintaining the correct engine revolu-
tions and forward speed during filling and spraying.
A second throttle lever is situated on the left hand side
of the machine under the platform, and can be used
during filling of water and chemicals.
Engine STOP warning lamp
This lamp indicates a malfunction:
• Engine coolant temperature too high
• Engine oil pressure too low
• Hydraulic oil level too low
If the STOP lamp should light, stop the machine and en-
gine instantly and sort out the cause to the failure.
Spraying pump control lamp
Lights when diaphragm spraying pump is engaged.
A second lamp is situated at the machine left hand-side
at the throttle and pump controls.
Engine pre-heating control lamp
The engine pre-heating device is functioning automati-
cally. Start the engine when the pre-heating control
lamp switches off.
Battery isolator switch control lamp
This lamp indicates that battery isolator switch is on,
and 12V is present in the electrical circuit.
Windscreen wiper switch
The windscreen wiper has three positions:
• Off
• Normal
• Fast
Working lamps switch
Controls front fitted working lamps. The lamps can only
be switched on when at least the position lamps are
switched on. The working lamps must be switched off
on public roads.
Wind screen washer switch
Controls the windscreen washer. Use plenty of screen
wash before starting the wiper to avoid scratches in the
windscreen.
Auxiliary lights switch
Switch to be used if extra working lamps are to be fitted.
Windscreen washer reservoir
To be filled with clean water or an approved screen
wash. In freezing conditions use frost proof screen
wash. Do not use engine antifreeze.
Fuse box (dash board)
For details see section “Electrical system maintenance”.
On/off switch HARDI PILOT
For switching on and off the HARDI PILOT. This switch
by-passes the start key.
Cab interior lamp
The cab interior light switch is situated at the frame of
the lens.
Fan control 3-speed switch
Controls the cab fan speed.
0 Off
1 Low
2 Normal
3 Full
The air conditioning can only be operated when the fan
is set at pos. 1-3.
Fuse box
For details see section “Electrical system maintenance”
Air conditioning warning buzzer
Will buzz simultaneously with control lamp for “ Air con-
ditioning overpressure” See paragraph “Air conditioning”
Air conditioning control lamp “overpressure”
If the refrigerant pressure in the air conditioning circuit
becomes too high, this warning lamp will light. See para-
graph “Air conditioning”
Air conditioning control lamp “low pressure”
If the refrigerant level or pressure in the air conditioning
circuit is too low, this lamp will light. See paragraph “Air
conditioning”
Parking brake lever
The parking brake is working on all four wheels.
Up
= Engaged
Down = Disengaged
In case of loss of hydraulic pressure the parking brake
will engage automatically.