HANYOUNG NUX NP200, Руководство пользователя

Страница: 72 / 74

72
D REGISTER Description
0604 HYS Dead band (Hysteresis (ON/OFF control)) G.OUT
0605
HEO Heat Emergency Output G.OUT
0606
CEO Cool Emergency Output G.OUT
0607
OL-H Output high limit G.OUT
0608
OL-L Output low limit G.OUT
0610 INP Input type selection G.IN
0611
UNIT Input range unit selection G.IN
0612
FR-H Upper range G.IN
0613
FR-L Lower range G.IN
0614
DP-P Decimal point input G.IN
0615 SL-H High scale G.IN
0616
SL-L Low scale G.IN
0617
FILT PV bias G.IN
0618
BIAS PV bias G.IN
0619
B.OUT Show PV during input (sensor) disconnection G.IN
0620 RJC RJC ON/OFF G.IN
0621
U.UNIT User unit selection G.IN
0700
CPTNO_S Pattern number to edit or pattern number source to copy
0701 CPTNO_D Pattern number destination to copy
0702
CSEGNO Segment number to edit
0703
CFCMD Edit command [see below]
0704
CFANS Edit result [see below]
0800~0840
SEG value to edit (see program parameter)
0900 TUPT Total number of used patterns
0901~0930
NPTx Quantity of used segment in each pattern (X is the symbol that represents the pattern number)
0931
TUSEG Total number of used segments
1001~1099
MSVxx SV per each segment of the running pattern (xx is the symbol that represents the segment number)
1101~1199
MTMxx TM per each segment of the running pattern (xx is the symbol that represents the segment number)
Value command Description
1
INIT D0700~D0704 Init
2
FREAD After reading the CSEGNO of the CPTNO_S display it under the D0800
3
FWRITE Write the content under the D0800 in the CSEGN of the CPTNO_S
4
CPYPTF Copy the PT content of the CPTNO_S into the PT of the CPTNO_D
5 DELPTF Delete the PT of the CPTNO_S
6
INSSEG Insert in the CSEGNO of the CPTNO_S
7
DELSEG Delete the CSEGNO content of the CPTNO_S
8
PTUPLOAD After uploading the PT content of the CPTNO_S, show under the D1000
Value command Description
1
DONE Execution OK
2
NO PT No corresponding pattern (No SEG or Range Out)
3 NO SEG No corresponding pattern (No SEG content or Range Out)
4
PT RUN Correspondent Pattern running
5
PAR ERR Other command error
● [see] CFCMD (D0703) : Edit command
● [see] CFANS (D0704) : CFANS result