4
1. Safety Cautions
Alerts declared in the manual are classified to Danger, Warning and Caution by their criticality.
Danger DANGER indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury
Warning Warning indicates a potentially hazardous situation, which,
if not avoided, could result in death or serious injury.
Caution Caution used without the safety alert symbol indicates a potentially hazardous
situation, which, if not avoided, may result in minor or moderate injury, property damage.
Danger
Warning
Caution
1. The information in this manual is subject to chage without prior notice.
2. Before using the product you have purchased, check to make sure that it is exactly what you ordered.
3. On receipt of goods, please check for any damage or abnormality that have occurred during shipping
4. Envirionmental Conditions : Operating Temperature Range: 0 to 50 °C
Operating and Storage Humidity: 35 to 85% max. RH non-condensing
5. Do not use this product in the presence of TOXIC, CORROSIVE, FLAMMABLE, and OXIDIZING gases.
6. Do not use this product at any place with direct vibration or impact.
7. Do not use this product in the presence of water, oil, medical substances, moisture, dust, salt or iron contents.
(Use at the Pollution Degree 1~2)
8. Do not use organic solvents such as alcohol or benzene for this prodcts.
The bezel should only be cleaned with a soft cloth and neutral PH detergent.
9. Do not use this product at any place with excessive induction lesion, static electricity or magnetic noise.
10. Do not use this product at any place with possible thermal accumulation due to direct sunlight or heat radiation
11. Install this product at place no higher than 2,000m in altitude.
12. Attach the bractets(2pcs) on the holes of the panel and tighten with a screwdriver.
Fixing torque is about 14.7 N·cm (1.5 kg·cm)
1. If there is a possibility of an accident caused by errors or malfunctions of this product,
install external protection circuit to prevent the accident.
2. This product does not contain an electric switch or fuse, so the user needs to install
a separate electric switch or fuse externally. (Fuse rating : 250 V 0.5A)
3. When setting, “Input type selection number” must be selected in the Group Input(G.In) and also
“Output type selection number” must be selected in the Group Output(G.Out) before moving to other group.
If not, data of other group will be changed to the initial stage.
4. To prevent defection or malfunction of this product, supply proper power voltage in accordance with the rating.
5. To prevent electric shock or devise malfunction of this product, do not supply the power until the wiring is completed.
6. Since this product is not designed with explosion-protective structure, do not use it at any place with
flammable or explosive gas.
7. Do not disassemble, modify, revise or repair this product. This may cause malfunction, electric shock or fire.
8. Installation and removal of this product should be done while the power is off. Or it may cause malfunction or electric shock.
9. If the product is used in a manner not specified by the manufacturer, it may cause injuries or property damages.
10. To avoid an electric shock, the controller is intended to be mounted into an enclosed panel during its operation.
Do not touch or contact the input/output terminals, an electric shock may occur.
Danger
Warning
Caution
Содержание NP200
Страница 2: ......
