HANYOUNG NUX NP200, Руководство пользователя

Страница: 64 / 74

64
11. Specifications
◼ Input Specification
◼ Output
Input
Multi range type (Refer to “Input type Kinds and Range”)
Sampling time
100 ms
Input resolution
Basically for the numbers below the decimal point
Input impedance T/C & mV input: 1 MΩ min, DC mV input: approx 1 MΩ
Allowable signal source
resistance
T/C: Max 250 Ω, DC mV/V: Less than 2 kΩ
Allowable wiring resistance
RTD input: Less than 150 Ω/ 1 wire
Allowable input voltage
DC mV/Thermocouple/RTD: ±10 V, DC V: ±20 V
Noise removal rate
NMRR: more than 40 dB (50/60 Hz ±1 %) CMRR: more than 120 dB
Standard
Thermocouple/RTD (KS / IEC / DIN)
Input signal break detection
(Burn - out)
T/C: Up Scale / Down Scale
RTD: Up Scale
Detected voltage in signal break: Approx. 50 nA
Accuracy
Max scale 0.1 %
Relay output
Contact capacity : 240 V AC 3 A, 30 V DC 3 A (registance).
Composition of contac t : 1c
Output operation : time proportioned or ON/OFF
Time proportion cycle time : 1 ~ 1000 s
Output limit : 0.0 ~ 100.0 % Highest value(OL-H) and Lowest value(OL-L). (Trial for MAN / AT is possible).
ON/OFF hysterisis : 0 ~ 100 %
Time resolution : the small one in either 0.1 % or 10 ms
SSR output
ON voltage : more than 25 V DC (Load resistance more than 600 Ω when cut off happened
there’s limit on electric current of around 30 mA)
OFF voltage : less than 0.1 V DC Output operation: Time proportioned
Cycle time : 1 ~ 1000 s
Output limit : 0.0 ~ 100.0 % Highest value(OL-H) and Lowest value(OL-L). (Trial for MAN / AT is possible).
Time resolution : the small one in either 0.1 % or 10 ms
SCR output
(4~20 mA d.c.)
Output current range : 4 ~ 2 mA
DC output renewal cycle : 100 ms
Load resistance: less than 600 Ω Output operation : consecutive PID
Output ripple : less than 0.1 % of FS. (p-p) (150 Hz)
Accuracy : ±0.3% of FS. (range from 4 ~ 20mA DC) Resolution : around 3,000
Output limit : 0.0 ~ 100.0 % Highest value(OL-H) and Lowest value(OL-L).
(Trial for MAN / AT is possible).
Manual operation
Conversion to MANUAL operation is possible at the number 5 of operation screen and
communication.
A → M: output tracking M → A: bumpless
● Output type
◼ Certifications
Certification
UL (ongoing)
C-UL (ongoing)
CE (ongoing)