HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 78 / 82

74
7.3 Checks and maintenance of the attachments
–
Check whether the spacing between the lower beams of the forks of the forklift truck and the
lower hooks of accessories conform to the requirements of the accessory manual.
– Check whether the upper hook is properly embedded in the groove of the fork arm carrier of
the forklift truck.
– The upper and lower sliding support surfaces should be lubricated with general automotive
lithium based grease every 500 hours.
–
Check fasteners for tightness.
–
Regularly check whether hydraulic circuit connections are loose and whether the hose is
damaged. If it is damaged, it must not be used before repair.
– Regularly check whether the transmission or rotating elements of accessories are worn or stuck,
and replace them promptly if any damage or defect is found.
In the case of dynamic loads, check whether the working elements of the accessories are normal, whether
the working pressure of the accessories is normal, and whether the accessories work normally. If not, it is
necessary to check the hydraulic circuit, find any leaking elements, and replace the seals or the whole
circuit.