HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 75 / 82

71
6.8 Checks and maintenance of the control system assemblies
Operating steps:
– Park the forklift truck according to rules
and regulations.
– Open the right door and unplug the
battery.
– Open the cover of the counterweight.
Check, replace and adjust components of the
control system assemblies when they are exposed.
S/N Name Control Circuit Specifications
1 Oil pump controller
Control the oil pump
motor
350A
2 Traction Controller
Control the driving
motor
450A
3 Binding post /
4 Fuse Traction Controller 350A
5 Fuse Oil pump controller 250A
Caution

Unplug the battery before any operations on the electrical system of the forklift truck.

The controller is equipped with an accumulator. Do not touch the position between B+ and
B- to prevent an electric shock. In order to check or clean the controller, please power off first,
and then a load device (such as resistance and bulb) should be installed between B+ and B- to
discharge the capacitor inside the controller.

Take off the metal trim before any operations on the electrical system of the forklift truck.

When replacing a fuse, please select a new fuse of the same rating as the original.