HANGCHA XE Series Скачать руководство пользователя

Страница: 2 / 82

08/2023

Preface

Thank you for purchasing this XE series four-wheel lithium-ion battery forklift truck manufactured by

HANGCHA GROUP CO., LTD.

Please read this manual thoroughly to understand how to use and maintain the forklift truck safely.

The XE series lithium-ion battery forklift trucks are cost effective products developed based on

HANGCHA's "lithium-ion battery dedicated architecture" and "permanent magnet synchronous

technology". While continuing the lithium-ion battery forklift family design style, proven internal

combustion vehicle parts are adopted. The overall vehicle performance, ergonomics, reliability,

maintenance, outdoor operation capability, load capacity, etc. are optimized to meet customers' usage

scenarios for internal combustion forklift trucks. New high-performance models have been added to meet

the usage needs of different users under heavy load conditions.

This manual provides instructions on how to use the 1.5 t to 5.0 t XE series four-wheel battery forklift

truck correctly, instructing you on how to perform the safety operation and preventive maintenance.

Relevant operators and maintenance personnel must read this manual thoroughly before using it.

Due to the constant updating and improvement of our products, the functions of your forklift may be

slightly different from the instructions in this manual.

For any queries, please contact the sales company or agent of HANGCHA GROUP CO., LTD.

○

C August 2023, HANGCHA GROUP CO., LTD.

Содержание XE Series



















































































Результаты поиска

Содержание XE Series

Отзывы:

Похожие инструкции для XE Series

Бренды по названию

Популярные бренды

HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание XE Series

Отзывы:

Похожие инструкции для XE Series

Бренды по названию

Популярные бренды