HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 38 / 82

34
–
Lower the mast completely and tilt it
forward.
– Turn the key to the "0" position and
remove it from the switch.
– Press the emergency stop switch.
Warning

The truck must be parked on flat
ground. If the ground is not level, the
truck must be secured with wedges or
other objects.

Never park or leave the truck on a
slope.

Never park the truck with a raised
load.

The truck must be parked in the
designated safe parking area, not on
travel routes.
2.11 Checks after operation
Clean the truck after operation and conduct the
following checks:
– Check for any damage or leakage.
– Refill with lubricating oil as appropriate.
– Check the tires for any damage or
foreign objects.
–
Check the wheel nuts for any looseness.
–
Check the electrolyte level.
– If the fork did not lift to the maximum
height during the operation on that day, the
forks should be raised to the maximum
height two or three times after the operation
is completed.
Caution

In the event of any faults, prompt
maintenance should be made.

Do not use the truck before it is
repaired.
2.12 Parking and storage
Daily storage
–
Park the forklift at the designated place
and use wedge blocks to support the wheels.
– Pull the shift lever into the neutral
position.
– Engage the hand brake lever.
– Turn off the key switch and operate the
multi-valve handle several times to release
the remaining pressure in the oil cylinder and
pipeline.
– Unplug the power supply.
– Remove the key and keep it in a safe
place.
– Forklift trucks specially designed for cold