HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 76 / 82

72
7. Use, installation and safety rules for attachments
We select the accessories, such as the side shifter, fork positioner, rotator, push-puller and string rod, etc.,
in accordance with international standard ISO2328: Forklift trucks - Hook-on type fork arms and fork arm
carriages - Mounting dimensions.
Sifeshifter Fork Positioner Rotator Push-puller String rod
Round rod clamp Roll clamp Brick clamp Load bearing stabilizer Rotating fork
7.1 Installation of attachments
–
Without the technical permission of the company, it is strictly prohibited to modify the safety
and performance of the forklift truck accessories.
–
The actual rated bearing capacity shall be the rated bearing capacity of the forklift truck, the
bearing capacity of accessories, or the overall bearing capacity of the complete truck, whichever is
the smallest. Generally speaking, the comprehensive bearing capacity of the complete truck is the
lowest of the three. “Bearing capacity of accessories” is a calculated value for the force applied on
accessories.
–
The installation and positioning should be reasonable, reliable and safe, to avoid accessories
sliding from side to side along the fork arm carrier of the forklift truck during use.
– After the accessories are mounted, if there is a upper hook block, it should be embedded in the
notch of the upper beam, so that the offset between the center line of accessories
– and that of the fork arm carrier is less than 50 mm; otherwise, it will affect the lateral stability of
the forklift truck.
–
For accessories with a rotation function, (roll clamp, soft clamp, multi-purpose rigid arm clamp,
bucket clamp) after hanging and installation, stop blocks should be welded on both sides of the joint
between the upper beam of the fork arm carrier and the accessories to prevent sliding when