HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 59 / 82

55
2. Electrical parameters
Model 48 V 100 A 80 V 65 A
Rated input voltage
AC380 V ± 15%
Three-phase four-wire voltage
AC380 V ± 15%
Three-phase four-wire voltage
Input grid frequency 50/60 Hz 50/60 Hz
Power factor ≥ 0.99 ≥ 0.99
Input power ≤ 5.2 KW ≤ 5.2 KW
Efficiency ≥ 0.92 ≥ 0.92
Rated output voltage 48 V 80V
Rated output current 100 A 65A
Rated output power 4.8 KW 4.8 KW
DC output range 18VDC-65VDC 18VDC-65VDC
Output connector
GB125 A or Rema160 A
Male or female connector available
GB125 A or Rema160 A
Male or female connector available
Cooling method Forced air cooling Forced air cooling
Working temperature -20° C - 50° C -20° C - 50° C
Working humidity 0% - 95% 0% - 95%
IP class IP20 IP20
Noise 65dB 65dB
Altitude < 2000 m < 2000 m
3. Charger wiring installation and minimum AC input power requirements
4. Charging steps:
The charger's input and output power should be connected by qualified professionals. Connect after
unplugging the input socket or disconnecting the circuit breaker.
1) Move the truck near the charger. Make sure the plug and hands are dry before operating.
Model Input circuit sectional area (mm) Air-break switch model
48 V 100 A
3 × 2.5 mm2 + 1 × 2.5 mm2
3P + PE
32A - 3P
80 V 65 A
3 × 2.5 mm2 + 1 × 2.5 mm2
3P + PE
32A - 3P