Hamworthy Spetisbury, Инструкция по установке, пусконаладке и обслуживанию

Страница: 23 / 44

HAMWORTHY HEATING LTD 17
SPETISBURY 500001118/C
3. Snap side panels into
position on side rails locating
ball stud fasteners on base of
side panels into mating latches
on side rails.
4. Snap cross struts into
position to anchor side panels
in position.
5. Attach casing support strut to
front edges of side panels and
secure with M5 x 10 pozi
screws and washers.
Note: On assemblies with two side panels,
secure panels together with M8 x 16 hex head
screw, nut and washer utilising the 9mm
diameter hole towards the top of the side panel.
6. Snap top panel(s) into
position, locating on pre-fitted
latch and strikers. Note that top
panel should overlap to the
front.
Figure 10.16
Figure 10.17
Figure 10.18