Hamlet HNW150APBR, Руководство пользователя

Страница: 202 / 221

Wi-Fi Personal Bridge 150 User Manual
202
A
Configuring your Computers
This appendix provides instructions for configuring the Internet settings on your computers to work
with the Wireless Gateway.
Configuring Ethernet PCs
Before you begin
By default, the Wireless Gateway automatically assigns the required Internet settings to your PCs.
You need to configure the PCs to accept this information when it is assigned.
Note
In some cases, you may want to assign Internet information
manually to some or all of your computers rather than allow the
Wireless Gateway to do so. See
Assigning static Internet
information to your PCs for instructions.
•
If you have connected your LAN PCs via Ethernet to the Wireless Gateway, follow the
instructions that correspond to the operating system installed on your PC:
•
Windows® XP PCs
•
Windows 2000 PCs
•
Windows Me PCs
•
Windows 95, 98 PCs
Windows® XP PCs
1. In the Windows task bar, click the Start button, and then click Control Panel .
2. Double-click the Network Connections icon.
3. In the
LAN or High-Speed Internet window, right-click on the icon corresponding to your network
interface card (NIC) and select Properties . (Often, this icon is labeled Local Area Connection ).
The Local Area Connection dialog box is displayed with a list of currently installed network
items.
4. Ensure that the check box to the left of the item labeled Internet Protocol TCP/IP is checked and
click Properties .
5. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain an
IP address automatically . Also click the radio button labeled Obtain DNS server address
automatically .
6. Click OK twice to confirm your changes, and then close the Control Panel.
Windows 2000 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel .
2. Double-click the Network and Dial-up Connections icon.
3. In the
Network and Dial-up Connections window, right-click the Local Area Connection icon, and
then select Properties .
The Local Area Connection Properties dialog box is displayed with a list of currently installed
network components. If the list includes Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 10.
4. If Internet Protocol (TCP/IP) does not display as an installed component, click Install …