Halma Wagtech Palintest Potatest Go Скачать руководство пользователя страница 29

Страница: 29 / 48

Incubation and Incubator Operation

.2 Language Update

To update languages:

• Start the

Pota Pal app

• Click the

‘Language Update’

icon

• Click icon, navigate to file location

and highlight language file

• Click open then

‘Send File’

to install

• The file will upload with incubator

displaying mode screen

• Upon completion the message

‘Charging’

will appear on the screen

• Language update will also include

any updates to voice instructions

.3 View Incubation Cycle

Up to 100 incubation cycles will be stored

on the incubator in chronological order.

To view incubation data:
• Select

‘View Incubation Data’

• The dialogue screen will list the incubation

cycles available for view listed by date/time,
incubation protocol and number

• Choose the required cycle

to view and press

‘OK’

• The app will plot incubator temperature

on the top graph and power consumption
on the lower graph over the entire
incubator cycle

• Drag the progress icon to the right to

see the trend throughout the cycle

• Click

‘Fit to Window’

to see the

entire incubation cycle on the device
window at once

NOTE:

only one incubation data file can

be viewed; before opening additional

cycles close the currently open view.

.4 Upload Audio Instructions

The unique audible instructions included in

the incubator, support new and experienced

users alike in providing simple support for

key steps in microbiological analysis.

Audible prompts are included in English,

French, Spanish and Chinese (Mandarin).

New prompts in local languages and dialects
can be uploaded using the

Pota Pal app

and

Audacity

software functionality. The Android

app also has the ability to record prompts.

To create correct format audio files for upload,
download the freeware Audacity software
(

www.audacity.sourceforge.net

) to

your internet-enabled device.

The predefined format of acceptable
audio files is:

File extension should be *.wav

Bit rate is 16bps

Sample rate frequency set to 8kHz

Max file size per clip is 640KB

Max length per clip is 40 seconds

Once audio files have been created for the
individual prompts in the desired language/
dialect, save them to a memorable location.

To upload instructions via the

Pota Pal app

• Connect the incubator via the USB cable

• Open the

Pota Pal app

• Select

‘Upload Audio Instructions’

• Select the

Prompt Card

required for

the audible instructions (see section
6.3.4 and existing prompt cards)

• Select the address from Intro

(0) to 6 for the audible prompt

• Select the file to upload

to the specified location

• Select

‘Upload’

and the progress

bar will show the upload action

• Once updated, the selection of

‘Custom’

will appear in the Voice

Instructions menu and can be played
in the usual way

Содержание Wagtech Palintest Potatest Go

















































Результаты поиска

Содержание Wagtech Palintest Potatest Go

Отзывы:

Похожие инструкции для Wagtech Palintest Potatest Go

Бренды по названию

Популярные бренды

Halma Wagtech Palintest Potatest Go, Руководство пользователя

Результаты поиска

Содержание Wagtech Palintest Potatest Go

Отзывы:

Похожие инструкции для Wagtech Palintest Potatest Go

Бренды по названию

Популярные бренды