Halma Wagtech Palintest Potatest Go Скачать руководство пользователя страница 23

Страница: 23 / 48

6.3 Recharging the 12V DC Battery

Note:

For optimal recharging,

switch off the incubator.

To recharge the incubator battery:

• Connect the cable of the mains adapter

to the incubator via the socket on the
rear of the case

• Connect the red and black cable

connectors to the correct terminals on
the battery and plug the other end into
the right hand side of the incubator lid

• Turn on mains electrical supply
• Charge for at least 8 hours or until the

LED light turns green

• The LED on the mains adapter

indicates the status of

‘charging’

Yellow = charging
Green = complete/trickle charging

6.4 Setup and Operation of Incubator

6.4.1 Start-up and Mode Page

• Ensure the incubator is connected to a

reliable power supply. To switch the incubator
on, press the

POWER

button and release

• A red LED in the right hand corner of the

incubator lid indicates that power is supplied
and the incubator is on. The backlight will
illuminate automatically on key press.

• The initial screen is the

Mode

page and

offers four options. Navigation between
the options is carried out using the

UP/DOWN

buttons.

• The four options are:

Incubation

- select this option to

carry out an incubation.

Voice Instructions

- select this option to

hear useful audio instructions for key steps.
Used with the prompt cards included.

Setup

- view or set User ID, Test Protocol,

Speaker Volume, Date Format, Date, Time,
Language, Check Calibration, Software
Version and Resuscitation Period.

Data Log

- select this option to view

reports of the last five incubation cycles.

Incubation and Incubator Operation

Useful to Know

• Ideally the incubator should be

recharged after each use, although as
previously mentioned it is capable of
running for up to 5 complete incubation
cycles before this becomes necessary

• If this is not possible then ensure

to charge the battery fully after
prolonged periods of field use and
try to leave the battery charged up
when not using the kit

• Take care never to allow the battery

to discharge completely as this will
shorten its working life

Содержание Wagtech Palintest Potatest Go

















































Результаты поиска

Содержание Wagtech Palintest Potatest Go

Отзывы:

Похожие инструкции для Wagtech Palintest Potatest Go

Бренды по названию

Популярные бренды

Halma Wagtech Palintest Potatest Go, Руководство пользователя

Результаты поиска

Содержание Wagtech Palintest Potatest Go

Отзывы:

Похожие инструкции для Wagtech Palintest Potatest Go

Бренды по названию

Популярные бренды