HAKO Citymaster 2200, Руководство по эксплуатации

Страница: 200 / 238

200
05-1481-00-00.fm
Maintenance and servicing
5.11.2 Topping up the hydraulic oil
Observe the Safety instructions – Hydraulic system, see page 198.
1. Place the vehicle on a level surface and secure it with the parking
brake.
2. If necessary, raise the tipper.
3. Switch the engine off and pull out the ignition key. Allow the engine to
cool down.
4. Open the side flap
Fig. 1-A
, see page 183.
5. Unscrew the filler cap
Fig. 1-B
of the return filter and slowly top up
hydraulic oil.
Hydraulic oil specification, see Engine/vehicle fluids and lubricants.
6. Once all the hydraulic oil has returned into the hydraulic tank, check the
hydraulic oil level at the sight glass
Fig. 1-C
.
•
Sketch
Fig. 1-I:
The hydraulic oil level is correct if it is visible at the
lower edge of the sight glass.
•
Sketch
Fig. 1-II:
This ensures the level is between the MIN and MAX
markings when the dirt hopper is lowered.
7. Re-install the filler cap
Fig. 1-B
and lower the tipper again.
Use only hydraulic oils approved by the manufacturer, see page 179.
5.11.3 Changing the return filter
Observe the Safety instructions – Hydraulic system, see page 198.
If a return filter is soiled, it is signalled by the warning symbol
Fig. 159-A
in
the multifunction display. Have the return filter replaced by an authorised
workshop.
I
II
A
B
C
Fig. 159:
A
Fig. 1: