HAKO Citymaster 2200, Руководство по эксплуатации

Страница: 154 / 238

154
03-1481-00-00.fm
Operation
Cleaning the sweeping unit and
the suction mouth
Check the sweeping unit daily for contamination and clean as required.
Check the suction mouth
Fig. 129-A
daily for contamination and clean as
required.
1. Drive the vehicle to a suitable cleaning place and park it safely.
2. Thoroughly clean the sweeping unit with a water hose.
3. Use the joysticks
Fig. 129-113
and
114
to raise and swing out the
brush.
4. Move a water hose to and fro under the coarse material flap when the
suction fan is running. Remove the contamination in the entire suction
mouth with the water jet.
5. Empty the dirt hopper, see page 152.
Cleaning the fresh water filter
The fresh water filter
Fig. 130-A
is located on the right-hand side of the
vehicle under the dirt hopper. Check the fresh water filter daily for
contamination and clean as required.
1. Drive the vehicle to a suitable cleaning place and park it safely.
2. Unscrew the filter housing, check the fresh water filter for openness and
clean if necessary.
Cleaning spray nozzles and ball valve filters
The spray nozzles
Fig. 131-A
and the ball valve filters
Fig. 131-B
for the
brush are located at the sweeping unit. Check the spray nozzles and the
ball valve filters daily for contamination and clean as required.
1. Drive the vehicle to a suitable cleaning place and park it safely.
2. Remove the spray nozzles and the ball valve filters, check them for
openness and clean if necessary.
Fig. 129:
A
113 114
Note
The suction fan is only running when the dirt hopper is
lowered and the dirt hopper flap is closed.
Fig. 130:
A
A
Fig. 131:
B