manualshive.com logo in svg

Hach DR 6000, Руководство пользователя

Поделиться
Скачать
Hach DR 6000 Скачать руководство пользователя страница 13

13

General information

Follow the following safety information, in addition to any local 
guidelines in force.

Safety information for the correct use of the instrument:

•

Do not operate the instrument in hospitals or comparable 
establishments in the vicinity of medical equipment, such as 
pace makers or hearing aids.

•

Do not operate the instrument near highly flammable 
substances, such as fuels, highly combustible chemicals and 
explosives.

•

Do not operate the device near combustible gases, vapors or 
dust.

•

Do not vibrate or jolt the instrument.

•

The instrument can cause interference in immediate 
proximity to televisions, radios and computers.

•

Do not open the instrument.

•

Guarantee is voided if the instrument is not used in 
accordance with the guidelines present in this document. 

2.1.3.1

Certification (integrated RFID module)

FCC ID: YUH-QR15HL

IC: 9278A-QR15HL

This device complies with Part 15 of the FCC rules and Industry 
Canada license exempt RSS standard(s).

Operation is subject to the following two conditions:

1.

this device may not cause interference, and

2.

this device must accept any interference, including 
interference that may cause undesired operation of the 
device.

Le présent appareil est conforme aux CNR d'Industrie Canada 
applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

1.

l'appareil nedoit pas produire de brouillage, et

2.

l'utilisateur de l'appareil doit accepter tout brouillage 
radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le 
fonctionnement.

Changes or modifications to this equipment not expressly 
approved by the party responsible for compliance could void the 
user's authority to operate the equipment.

This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the FCC 
rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this 

Содержание DR 6000





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды