manualshive.com logo in svg

Hach DR 6000, Руководство пользователя

Поделиться
Скачать
Hach DR 6000 Скачать руководство пользователя страница 111

111

Expanded programs

3.

Tap on 

Options

 and then on 

Reference: Off

 in the "Options" 

menu to select another scan that should be shown on the 
same display as the current scan. Highlight the required 
scan number and press Highlight Reference.

Note: Once a reference scan has been selected, the Reference: 
Off key in the "Options" menu turns into Reference: On.

Note: Two scans with the same wavelength range and step can be 
displayed using the overlay option. This process can be repeated 
until all matching scans are displayed.

4.

The reference curve is shown in orange. The absorbance or 
transmittance value and the associated wavelength are 
highlighted in orange.

•

In addition, the difference of the absorbance and/or 
transmission value between the two scans (measured 
scan and reference scan) is indicated/highlighted at each 
position of the cursor.

Note: A blue and an orange-colored field are shown top left in the 
display. The orange-colored field is for the reference scan, the blue 
for the current wavelength scan. 

5.

Tap on the blue or orange-colored field in the left top corner 
of the display to switch between the measured wavelength 
scan and the reference scan.

Third option:

Comparison of two already existing scans from the measurement 
data memory

1.

Call up the measurement data in the main menu under 

Recall Data/Wavelength Scan

.

2.

Select the first scan.

3.

Tap on 

Reference 

in the "Options" menu. Select the second 

scan.

4.

Tap on 

Graph

.

Note: Once a reference scan has been selected, the Reference: 
Off key in the "Options" menu turns into Reference: On.

Note: Two scans with the same wavelength range and step can be 
displayed using the overlay option. This process can be repeated 
until all matching scans are displayed.

5.

The reference curve is shown in orange. The absorbance or 
transmittance value and the associated wavelength are 
highlighted in orange.

Note: A blue and an orange-colored field are shown top left in the 
display. The orange-colored field is for the reference scan, the blue 
for the current wavelength scan. 

6.

Tap on the blue or orange-colored field in the left top corner 
of the display to switch between the measured wavelength 
scan and the reference scan.

Содержание DR 6000





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды