1-4
Table 1-5
AC/DC power input
Item
Description
Rated voltage range
For AC power input: 100 VAC to 240 VAC, 50 Hz or 60 Hz
For DC power input: –48 VDC to –60 VDC
Max input voltage range
For AC power input: 90 VAC to 264 VAC, 47 Hz to 63 Hz
For DC power input: –36 VDC to –72 VDC
Power consumption
53.4 W to 67.7 W
z
You are not recommended to use an AC power module with a DC power module on the device.
z
No AC or DC power module is provided with the access controller. You need to prepare them
yourself.
Components
LEDs
The WX5004 provides LEDs on the front panel, as shown in
Figure 1-4
LEDs of the WX5004
(4)
(1)
(2)
(5)
(3)
(6)
(1) 1000 Mbps LED of gigabit Ethernet interface (1000M)
(2) System status LED (SYS)
(3) Status LED of PSU 1 (PWR1)
(4) 10/100 Mbps LED of gigabit Ethernet interface (10/100M)
(5) LED of the expansion card (MOD)
(6) Status LED of PSU 2 (PWR2)
Table 1-6
Description of LEDs
LEDs
Silkscreen
Status
Description
Solid green
PSU 1 supplies power to the system
normally.
Solid yellow
PSU 1 is faulty.
LED of PSU 1
(green/yellow)
PWR1
Off
No PSU is installed in the slot.
