3-6
Installing the Access Controller with Front Mounting Brackets and a Tray
The tray is an optional component, which needs to be separately ordered if needed.
Installation procedure with front mounting brackets and a tray:
1) Put on the EAD-preventive wrist strap and check that the rack is sturdy and properly earthed.
2) Take out the screws, which are packaged with the front mounting brackets. Attach the front
mounting brackets to the access controller with the screws, as shown in
.
3) Fix the tray horizontally to a proper poison on the rack, as shown in
. (This figure is just
for your reference. The installation may differ on a different rack.)
Figure 3-10
Install a tray
4) Place the access controller on the tray horizontally, gently push the access controller into the rack
along the tray, and then use screws and the corresponding cage nuts to fix the front mounting
brackets to the front square-hole rack rails of the rack, as shown in
.
Figure 3-11
Installation with front mounting brackets and a tray
