H3C WX5004, Руководство по установке

Страница: 53 / 85

5-13
|<5> 115200 |
|<0> Exit |
================================================================================
Enter your choice(0-5):
Change the communication baud rate. For the detailed modification procedure, refer to section
“
Modifying Serial Interface Parameters ” on page 5-8 . After the modification, the system displays the
following information:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
The current baudrate is 115200 bps
=================================<BAUDRATE SET>=============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default) |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200* |
|<0> Exit |
============================================================================
Enter your choice(0-5):
Enter
0
to return to the BootWare operation serial submenu.
======================<BOOTWARE OPERATION SERIAL SUB-MENU>======================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-4):
Enter
1
on the BootWare operation serial submenu. The system displays the following information:
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
Select
Transfer
>
Send file…
on the terminal window. The following dialog box appears:
Figure 5-5 Send File
dialog box