5-26
Password Set Successfully.
z
Once you enter a wrong old password or different new passwords, the password modification
operation will fail and the system will exit this operation.
z
The BootWare password can consist of a maximum of 32 printable characters, such as letters,
numerals, and punctuations.
Super Password Loss
The super password enables you to switch between four super levels. Without a super password, you
cannot perform higher privilege operations.
Enter
8
from the BootWare main menu to clear the super password. Then, reboot the access controller.
You will directly enter system view after the access controller restarts.
This setting works only once. When the access controller is restarted for a second time, the super
password is restored.
Backing Up and Restoring the BootWare
Using the BootWare Menu
You can back up and restore the BootWare on the BootWare operation submenu. After the BootWare is
backed up on a storage device, if the normal BootWare is lost, you can restore it using the backup
BootWare to boot the device. Enter
7
on the BootWare main menu to enter the BootWare operation
submenu. For details of this submenu, refer to section “
” on page
.
To back up the basic and extended BootWare to the CF card, enter
1
on the BootWare operation
submenu and follow the prompts:
Will you backup the Basic BootWare? [Y/N]Y
Begin to backup the Basic BootWare...................Done!
Will you backup the Extend BootWare? [Y/N]Y
Begin to backup the Extend BootWare...................Done!
To restore the backup BootWare from the CF card, enter
2
on the BootWare operation submenu and
follow the prompts:
Will you restore the Basic BootWare? [Y/N]Y
Begin to restore Normal Basic BootWare...Done!
Will you restore the Extend BootWare? [Y/N]Y
Begin to restore Normal Extend BootWare....Done!
Using the CLI
You can also use
bootrom
commands to back up and restore the BootWare.
Backing up the BootWare
z
Back up the complete BootWare to the Flash:
