H3C WX5004, Руководство по установке

Страница: 54 / 85

5-14
Click
Browse…
to select the application file to be downloaded, and select
Xmodem
from the
Protocol
drop-down list. Then click
Send
. The following dialog box appears:
Figure 5-6
Sending file dialog box
Upon successful download, the system displays the following information:
Download successfully!
10323456 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare.................Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare...........Done!
Change the baud rate on the configuration terminal from 115200 bps to 9600 bps, and then reboot the
access controller.
z
The actual file name, size and path may differ from what are shown in the figure above. Before
upgrading the software of your access controller, check the current BootWare version and the
application program version to ensure that the correct file is used for the upgrade.
z
After you download files with a changed baud rate, timely change the baud rate in the
HyperTerminal to 9600 bps to ensure the normal display on the console screen when the system
boots or reboots.
Upgrading Applications Through a Serial Interface on the BootWare
Menu
The application file upgrade through a serial port is implemented on the serial submenu. Enter
2
on the
BootWare main menu to enter the serial submenu. For detailed description on this submenu, refer to
section “
Serial submenu ” on page 5-6 .
The following example shows how to upgrade the main application file.