H3C SR6608/6604 Routers Installation Manual
Chapter 1 Router Overview
1-29
interfaces. For the description of the optical Ethernet interface LEDs, see Table
1-7.
(1)
(2) (3) (4)
(5)
(6)
(9)
(8)
(7)
(1) 1000 Mbps optical Ethernet interface (SFP1)
(2) 10/100/1000 Mbps electrical Ethernet interface (GE0) LED
(3) 10/100/1000 Mbps electrical Ethernet interface (GE1)
(4) 10/100/1000 Mbps electrical Ethernet interface (GE1) LED
(5) 10/100/1000 Mbps electrical Ethernet interface (GE0)
(6) 1000 Mbps optical Ethernet interface (SFP0)
(7) 1000 Mbps optical Ethernet interface (SFP0) LED
(8) 1000 Mbps optical Ethernet interface (SFP1) LED
(9) Run LED (RUN)
Figure 1-16
Combo interfaces on FIP-100/FIP-200
Note:
For a Combo interface, you can use either the electrical Ethernet interface or the optical
Ethernet interface. You can use the
combo enable
{
copper
|
fiber
} command in
interface view to switch between the optical and electrical Ethernet interfaces. For
details about the
combo enable
{
copper
|
fiber
} command, refer to
H3C SR66 Series
Routers User Manual
.
II. Technical specifications for Combo interfaces
Technical specifications for electrical Ethernet interfaces
Table 1-22
Technical specifications for electrical Ethernet interfaces
Item
Specification
Connector
RJ-45
Interface type
Automatic MDI/MDI-X
