H3C SR6608/6604 Routers Installation Manual
Chapter 7 Maintaining Software
7-32
# Add FTP username and password.
[H3C] local-user guest
New local user added.
[H3C-luser- guest] service-type ftp
[H3C-luser- guest] password simple 123456
[H3C-luser-guest] level 3
Table 7-11
Description on the display information of enabling the FTP service
Display information
Description
ftp server enable
Enable the FTP server function.
local-user guest
Create a local user, and enter user view.
service-type ftp
Set the service type that can be used locally to FTP.
password simple 123456
Configure the user password.
level 3
Set the user level to 3.
Note:
z
The FTP service is enabled after the authentication and authorization of the FTP
server are configured. The FTP server supports multi-client access. A remote FTP
client sends a request to the FTP server. The FTP server executes an action
accordingly and returns the execution result to the client.
z
After you configure the FTP server authentication and authorization, you need to set
the user level to 3. Otherwise, when you restore the backed-up file to the router, the
system will prompt that “You have no rights to store files”. For configurations of user
levels, refer to
H3C SR66 Series Routers User Manual
.
3)
Enable the FTP client program on the PC.
In the following example, the FTP client program is the built-in Windows XP FTP client:
Enter
ftp
in the DOS window:
C:\Documents and Settings\Administrator>ftp
ftp>
ftp> open 192.168.80.10
Connected to 192.168.80.10.
220 FTP service ready.
User (192.168.80.10:(none)): guest
331 Password required for guest
Password:
230 User logged in.