H3C SR6608/6604 Routers Installation Manual
Chapter 6 Starting and Configuring the Router
6-6
LED
State
Description
OFF
The system works normally without any alarm.
ON
There is at least one alarm. You need to view the
system log.
ACT (red)
Fast flashing
(8 Hz)
A serious fault has occurred and the needs to be
treated immediately.
2)
The ventilation system works normally. You can hear that the fan is working.
3)
The configuration terminal displays information normally. You can see the startup
window on the local configuration terminal. For more information, refer to section
6.3 “Startup Process“ on page 6-6.
4)
After completing the power-on self-test (POST), the system prompts you to press
Enter
. When the prompt appears, you can proceed to configure the router.
6.3 Startup Process
After power-on, the router initializes its memory, and then runs the extended BootWare.
The following information appears on the terminal screen:
System start booting...
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing...................
Done!
************************************************************
* *
* H3C SR6608 BootWare, Version 1.15 *
* *
************************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Sep 5 2007
CPU Type : MPC8548E
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 400MHz
BootWare Size : 1024KB
Flash Size : 4MB
cfa0 Size : 495MB
NVRAM Size : 128KB
BASIC CPLD Version : 134.0
EXTEND CPLD Version : 133.0
