H3C SR6608/6604 Routers Installation Manual
Chapter 1 Router Overview
1-12
(1)
(2)
(5)
(4)
(3)
(1) LED for 10/100/1000 Mbps electrical Ethernet interface 0
(2) LED for 10/100/1000 Mbps electrical Ethernet interface 1
(3) 1000 Mbps optical Ethernet interface LED (SFP0)
(4) 1000 Mbps optical Ethernet interface LED (SFP1)
(5) Run LED (RUN)
Figure 1-8
FIP-100 LEDs
Table 1-7
Description of FIP-100 LEDs
LED
Status
Meaning
Off
No power input is available or the FIP-100 has
failed.
Slow blinking
(1 Hz)
The FIP100 is working normally.
RUN (green)
Fast blinking (8
Hz)
Application software is being loaded (in this case,
never power off the device or hot-swap the
FIP100; otherwise the FIP100 may be damaged)
or FIP-100 is not working.
Off
No optical link is present.
Solid green
An optical link is present.
Blinking green
Data is being sent or received at a rate of 1000
Mbps.
SFP0 to
SFP1
(yellow/gree
n)
Solid yellow
The optical transceiver failed to be detected.
Off
No link is present.
Solid green
A 1000 Mbps link is present.
Blinking green
Data is being received or transmitted at a rate of
1000 Mbps.
Solid yellow
A 10/100 Mbps link is present.
GE0 to GE1
(yellow/gree
n)
Blinking yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
