22
Figure 28 Removing a fan tray
Installing/removing a power module
WARNING!
In power redundancy mode, you can replace a power module without powering off the switch but
you must strictly follow the installation and procedures in
and
to avoid any bodily
injury or damage to the switch.
CAUTION:
Provide a circuit breaker for each power module.
Figure 29 Installation procedure
Figure 30 Removal procedure
Installing a PSR150 power module
CAUTION:
To prevent damage to the power module or the connectors on the backplane, insert the power
module gently. If you encounter a hard resistance when inserting the power module, pull out the
power module and insert it again.
For the PSR150-A1, and PSR150-D1 power modules, the installation and removal procedures are
the same. The following takes the PSR150-A1 power module as an example.
Содержание S5130-30C-HI
Страница 23: ...16 Figure 20 Mounting the switch in the rack 1 Figure 21 Mounting the switch in the rack 2...
Страница 40: ...33 Figure 46 Installing an expansion card LSWM2SP2PM Figure 47 Installing an expansion card LSPM6FWD 1 2 3 4...
Страница 51: ...44 Figure 57 Connecting the switches in one rack 1 2 3 4 5 6 7 8 9...
Страница 89: ...82 Figure 81 Airflow through the S5130 54C HI switch Figure 82 Airflow through the S5130 54QS HI switch...
