H3C S5130-30C-HI, Руководство по установке

Страница: 86 / 89

79
Table 30 QSFP+ port LED description
LED status Description
Steady green
A transceiver module or cable has been correctly installed in the port and a link
is present on the port.
Flashing green The port is sending or receiving data.
Off
•
No transceiver module or cable has been installed in the port.
•
No link is present on the port.
•
The port mode LED operates in IRF mode.
Management Ethernet port LEDs
S5130-30C-HI&S5130-34C-HI&S5130-54C-HI&S5130-30F-HI&S5130-30C-PWR-HI&S5130-54C-
PWR-HI
The S5130-30C-HI, S5130-34C-HI, S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and
S5130-54C-PWR-HI switches provide an ACT/LINK LED to indicate the operating state of the
management Ethernet port.
Table 31 Management Ethernet port LED description for the S5130-30C-HI, S5130-34C-HI,
S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and S5130-54C-PWR-HI switches
Management Ethernet port LED (ACT/LINK) status Description
Steady green A link is present on the port.
Steady yellow The port is sending or receiving data
Flashing yellow (3 Hz) The port has failed POST.
Off No link is present on the port.
S5130-54QS-HI
The S5130-54QS-HI switch provides one LINK LED and one ACT LED for each management
Ethernet port.
Table 32 Management Ethernet port LEDs description for the S5130-54QS-HI switch
LED mark Status Description
LINK
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
ACT
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
Expansion card status LED
The S5130-30C-HI, S5130-34C-HI, S5130-54C-HI, S5130-30F-HI, S5130-30C-PWR-HI, and
S5130-54C-PWR-HI switches provide an expansion card slot at the rear. The expansion card status
LED on the front panel indicates the operating state of the expansion card.