H3C S5130-30C-HI, Руководство по установке

Страница: 77 / 89

70
NOTE:
USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee the
correct operation of USB devices from all vendors on the switch. If a USB device fails to operate on
the switch, replace it with one from another vendor.
10/100/1000BASE-T autosensing Ethernet port
Table 15 10/100/1000BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X, auto-sensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab
1/10BASE-T autosensing Ethernet port
The LSWM2XGT2PM interface card provides 1/10BASE-T autosensing Ethernet ports.
Table 16 1/10BASE-T autosensing Ethernet port specifications
Item Specification
Connector type RJ-45
Interface attributes 1/10 Gbps, full duplex, MDI/MDI-X auto-sensing
Max transmission distance
•
Category-6 UTP
—55 m (180.45 ft)
•
Category-6 STP
—100 m (328.09 ft)
•
Category-6 SFTP
—100 m (328.09 ft)
•
Category-6 and above twisted pair
—100 m (328.09 ft)
Transmission medium Category-6 (or above) twisted pair cable
Standards IEEE 802.3an, 802.3ab
100/1000Base-X SFP port
The S5130-30F-HI switch provides 24 fixed SFP ports. The S5130-34C-HI switch provides eight
fixed SFP ports. You can install the 100 Mbps SFP modules in
Table 17 and the 1000 Mbps SFP
transceiver modules in Table 18 in the SFP ports.