Guilin Woodpecker Medical Instrument Ai-Motor MotoPex Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 56

background image

33

4.9

Battery Charging

The motor handpiece has a built-in rechargeable lithium battery.
When charging the battery, leave approximately 10cm around the

charging base for easy access to the inlet and the power cord.

Connect the power adapter with the charging base. Confirm that it is

well connected, place the motor handpiece on the charging base. The
indicator light on the charging base turning blue indicates charging. The
indicator light on the base turning green indicates the battery is fully
charged. There is no need to charge further. (Only for MotoPex).

Insert the power adapter plug into the charging base power socket and

confirm  that  they  are correctly  connected.  Insert  the motor  handpiece
into  the  charging  base  (the  motor  handpiece  needs  to  be  correctly
aligned  with  the  charging  base  in  the  same  direction  for  charging).
When  the  blue  indicator  on  the  charging  base  flashes,  it  is  charging.
When  the  motor  handpiece  is  fully  charged,  the  blue  indicator  on  the
charging base would be always on (Only for Ai-Motor).

After charging, please unplug the power adapter.

4.10

Replacing Battery

Replace the battery if it seems the battery recharging time becomes

shorter. Please use the original lithium battery.

a)

Turn the motor handpiece power off.

b)

Use tweezers etc. to open the rubber cover and then remove the

screw.

c)

Remove the battery cover.

d)

Remove the old battery and disconnect the connector.

e)

Connect the new battery and place it in the motor handpiece.

f)

Replace the cover and its screw.

The actual apex for the canal is not
the same as that for the radiographic
apex. There are cases where the
apical foramen is placed coronally
compared to the radiographic apex.
In these cases, an X-ray might
indicate that the file has not reached
the apex even though it has actually
reached the apical foramen.

«
...
33
34
35
36
37
...
»

Содержание Ai-Motor MotoPex

























































Отзывы:

Нет отзывов

Похожие инструкции для Ai-Motor MotoPex

Бренд: Walker Bay Страницы: 8

Бренд: MacDon Страницы: 84

Бренд: MacDon Страницы: 89

Бренд: Patton electronics Страницы: 18

Бренд: Tabi Страницы: 8

Бренд: Dabi Atlante Страницы: 102

Бренд: JBL Страницы: 38

Бренд: JBSYSTEMS Light Страницы: 32

Бренд: JBM Страницы: 12

LSP400 LED Series

Бренд: WE-EF Страницы: 6

Бренд: ABB Страницы: 4

Бренд: Wayflex Страницы: 11

Бренд: Jefferson Страницы: 2

Бренд: Lighthouse Страницы: 2

Бренд: Jenx Страницы: 34

Бренд: B+S Страницы: 16

Бренд: Jandy Страницы: 52

Бренд: Kobelt Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды