Guilin Woodpecker Medical Instrument Ai-Motor MotoPex Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 56

background image

12

Warnings:

a)

Before plugging in or pulling out contra angle head, please make sure
the device is not in function.

b)

Please ensure Contra angle is inserted properly into the hand
piece before use.

2.5

Insertion and removal of file

2.5.1

Insertion of file

The file should be inserted into the contra- angle head before starting the hand
piece.

Press the push button on the contra-angle and insert the file. Tease

the file back and forth until it is oriented with an interior latch groove
and slips into place. Release the push button to make sure the file is
engaged properly in the contra-angle head.

Warnings:

After plugging the file into contra-angle, release the push button and assure that
the file cannot be taken out by gently pulling it.
Be careful when inserting files to avoid injury to fingers.
Inserting and removing files without holding the push button may damage the
chuck of the contra-angle.
Please use files with shanks that are in compliance with ISO standards. (ISO
standard: Ø2.334 – 2.350 mm)
2.5.2

Removal of file

Press the push button and then pull the file gently out of the contra-angle

«
...
12
13
14
15
16
...
»

Содержание Ai-Motor MotoPex

























































Отзывы:

Нет отзывов

Похожие инструкции для Ai-Motor MotoPex

Бренд: Fender Страницы: 15

Бренд: J D Squared Страницы: 18

Бренд: Taber Страницы: 27

Бренд: National Instruments Страницы: 16

Бренд: Jasco Страницы: 11

Бренд: Mackie Страницы: 18

Бренд: Mackie Страницы: 2

Бренд: Mackie Страницы: 8

Бренд: Mackie Страницы: 7

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренд: A&D Страницы: 29

Бренд: rbd instruments Страницы: 18

Бренд: ubicquia Страницы: 4

Бренд: IKEA Страницы: 24

Бренд: VaBroom Страницы: 4

Бренд: Ignis Pixel Страницы: 4

Бренд: Faro Страницы: 161

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды