GST GST200-2, Инструкция по установке и эксплуатации, Страница: 55 / 60

GST200-2 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 52
Appendix 2 Internal Fault Description
No.
Problems Description Causes
1
AC Power AC power fault No AC power
2
Bat Fault Battery fault No battery or low voltage
3
BATHighZ Battery high
resistance Battery aging or loose connection.
4
Charger Charger fault Charger circuit damaged.
5
Ground. F Ground fault Output loop connects to the ground.
6
F.P.E. F.P.E. output loop
fault F.P.E. output circuit opens, shorts or the
end-of-resistor is not connected.
7
Sounder A Sounder output
loop fault Souder output loop opens, shorts or the
end of line resistor is not connected.
8
Output1 Alarm output fault Alarm output circuit opens, shorts or
the end of line resistor is not
connected.
9
PowerBox Power box fault Power damaged or can
’t communicate
with main board.
10
Loop1FAIL Class A Loop 1
fault Class A loop 1 opens or shorts.
11
Loop2FAIL Class A Loop 2
fault Class A loop 2 opens or shorts.
12
Loop2 Card Loop board 2 fault Loop board 2 damaged or cannot
communicate with main board.
13
Key Fault Key fault CPU for keys damaged or can
’t
communicate with main board.
14
Access ZCP fault Zone indication panel damaged or
cannot communicate with main board.
15
ProtBoard Loop interface
board fault The board damaged or cannot
communicate with main board.
16
CRT Board CRT board fault CRT board damaged or cannot
communicate with main board.
17
Net Card Network card fault The card damaged or can
’t
communicate with main board.
18
Repeater Panel repeater fault The repeater damaged or can
’t
communicate with main board.