GST GST200-2 Скачать руководство пользователя страница 14

Страница: 14 / 60

GST200-2 Intelligent Fire Alarm Control Panel

Installation and Operation Manual

Page 11



The key of a zone is used to activate/silence sounder strobes in the zone.

3.1.4.2 Device Operation



Command LED:

Red. It illuminates when start command is given and goes out

when stop command is given or the FACP resets.



Keys:

Pressing it can start a device. If a device is started, pressing this key will stop

it.

3.2 Components

3.2.1 Standard Components

A standard FACP consists of main board, loop interface board, power supply, display

area, and zone indication and manual intervention panel (ZCP).



Main board

Main board is the core of the FACP, which contains CPU and interfaces to other

main parts and optional parts.



Loop interface board

This is the signal interface of the FACP, containing ports for communication,

detection, fire alarm output and fault output etc. The loop interface board connects

field devices and the FACP into a complete fire alarm system.



Power supply

It provides power to the main board, loop interface board and printer. Its backup

feature ensures that devices registered during commission will not be lost in case

of power fault.



Display area

This part is used to indicate and display different status of the system, and enables

relative operations through keypad (browsing, programming, printing and etc).



Zone indication and manual intervention panel (ZCP)

The ZCP can indicate fire alarm, fault/disable state of corresponding devices, and

start and stop them accordingly.

3.2.2 Optional Units



P-9901 Printer

It is a built-in micro printer. With dot matrix printing it can print 96 kinds of ASCII

code characters (capital or lower case of Latin letters, figures and symbols), 128

coded non-standard characters and chart symbol (some Chinese characters,

Greek letters, block symbol etc.), and 16 code characters (6×7 dot) which can be

defined by the user through programming, and replace any code font by command,

so as to print characters of different language.



Loop board

The loop board is used as the second Class A detection interface for connecting more

addressable devices. The construction of the loop board is shown in Fig. 3-5.

Содержание GST200-2





























































Результаты поиска

Содержание GST200-2

Отзывы:

GST GST200-2, Инструкция по установке и эксплуатации, Страница: 14 / 60

Результаты поиска

Содержание GST200-2

Отзывы: