GST200-2 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 23
Fig. 5-3
001 0f 003 !FIRE! 05:25 // There are fire alarms in three zones and this is the first.
Zone:001-Zone 1 // The number of zones with fire alarm and description of the
zone.
002/003 //There are three devices in the zone, and two of them alarmed.
Device-30 // The description of the device with the first fire alarm signal.
Last !Fire! Zone:003 // Zone number of the last fire alarm.
Zone 3 Device-061 //Description of zone with the last fire alarm and description
of the device of that zone with the first fire alarm.
2. Fire alarm screen for loop display mode is shown in Fig. 5-4.
Fig. 5-4
001 0f 006 !FIRE! 05:25 // There are six devices with fire alarm signals, and this
is the first.
Z001-L1-N030MCP // The number of zone with fire alarm and type and address
of the device in fire alarm.
Device-30 // Description of device in fire alarm.
Last! Fire! Zone:003 //Number of the zone where the last fire alarm occurs
Z-003 Device-066 // Description of zone and device of the last fire alarm.
5.2.2 Disposal of Fire Alarm Signal
When fire alarm occurs, first find out the location according to the information shown on
the FACP to verify whether the fire really happened.
If it’s a real fire, please take corresponding measures as outlined below.
001 0f 003 !FIRE! 05:25
Zone:001
－
Zone 1
002/003 Device-30
-------------------------------------
Last !Fire! Zone:003
Zone 3 Device-061
001 0f 006 !FIRE! 05:25
Z001-L1-N030MCP
Device-30
-------------------------------------
Last !Fire! Zone:003
Z-003 Device-066
Содержание GST200-2
Страница 1: ......