GST GST200-2, Инструкция по установке и эксплуатации, Страница: 33 / 60

GST200-2 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 30
Fig. 6-6

2 (Group) (012)(020) // 2 groups are defined. There are 12 addressable
devices on Loop 1, and 20 on Loop 2.

Group:01 office 1 // Zone number and location of the zone

NO. 001 Sounder //Device address and type

Output: Persist // Device properties

Office 1 // Device location

Entering number 4 to choose “4. In Test Mode Zones” will enter the screen for
browsing zones in test mode, as shown in Fig. 6-7.
Fig. 6-7

Sum:002 // Total number of zones in test
 Zone 01: office1 // Zone 1 is in test mode. Zone description is “office1”.

Zone 05: office5 // Zone 5 is in test mode. Zone
description is “office5”.
 Entering number 5 to choose “5: COM Devices” will enter the screen for browsing
network FACPs and repeater panels.
 Entering number 6 to choose “6. Access” will enter the screen for browsing ZCP
key definition, as in Fig. 6-8.
Browse Test Zone
Sum:002
Zone 01: office1
Zone 05: office5
ENTER
Browse
2 Group (012)(020)
Group:01(001)Sum:004
Group:02(002)Sum:016
Browse
Group: 01 Sum: 004
L2N001 Sounder
L2N002 SM Vent
L2N003 Sounder
L2N004 SM Vent
ENTER
Browse
Group: 01 office1
NO.001 Sounder
Output: Persist
Office1