GST GST100 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 48

GST GST100 Скачать руководство пользователя страница 17

GST100 Intelligent Fire Alarm Control Panel
Installation and Operation Manual

Page 13

Chapter 5 Display and Disposal of System Information

The FACP can start operation after installed following instructions in Chapter 4. Turn on its

power supply, it will start self-test and enter normal monitor status. It displays system normal

screen if it works normally. If there are any problems, corresponding display will appear on

the screen.

5.1 Message display rules

The FACP can display the following types of message: fire alarm, pre-alarm, supervisory,

action, delay, fault and disable.

5.1.1 Description of Displayed messages

Fig. 5-1

In the above picture,

1 means there is fire alarm in the system, the top part of the screen will always display the

latest fire alarm.

2 Current message type. You can change to displaying other messages or move among

different items by pressing

Tab

key.

3 Serial number of the current message.

4 Total number of this type of message.

5 Zone number of the message.

6 Device code of message.

7 Mark of the device, please refer to Appendix 2.

8 Occurring time of the message (Day/Month Hour : Minute).

If the position of 5 and 6 are

“-“, this message is the panel’s internal message, which could be

AC fault, battery fault, system fault, ALARM OUTPUT, SOUNDER OUTPUT or FAULT

OUTPUT.

«
...
15
16
17
18
19
...
»

Содержание GST100

















































Отзывы:

Нет отзывов