Water Softener
Weichwassermeister
®
GSX 5, GSX 10, GSX 10-I
Order no.-Nr. 075 187 970-inter Edited by: KONS-nkes-mrie G:\BA-187970-INTER_GSX 5-10.DOC
34
Pos. Key
Displayed
parameter
10 a
Regeneration step „salting“:
Symbol appears if the electrolysis current for the chlorine generation (dis-
infection of exchanger) is ok.
10 b Flow arrow be-
tween regen-
eration and
transfer valve
Depending on the respective regeneration step, the arrow points in one
direction or the other.
First filtrate (5)
Salting (1), displacing (2), backwash (3)
Fill brine tank (4): no pointing arrow available
,,
10 c Regeneration
valve
Regeneration motor (M) switches to the next regeneration step.
10 d Brine tank
Is indicated during the entire regeneration process (if activated).
Depending on the regeneration step, the corresponding arrow will ap-
pear:
↑
Brine is sucked from the brine tank.
↓
Water is filled into the brine tank.
10 e Reference run
regeneration
valve
Only appears during the reference run of the regeneration valve.
10 f Transfer valve
Transfer motor (M) switches to the other exchanger tank.
10 g Reference run
transfer valve
Only appears during the reference run of the transfer valve.
Background
illumination of
display
Is switched on for 10 minutes after the last operation of a key.
With every press of a key, initially, the background illumination is acti-
vated.
Is blinking during malfunctions / warnings.
Table F-2: Operating elements and display
Note:
If the system operates without malfunctions, only the most im-
portant information will be displayed. Fig. F-2, however, illustrates the
maximum number of features that may be displayed.
