Water Softener
Weichwassermeister
®
GSX 5, GSX 10, GSX 10-I
Order no.-Nr. 075 187 970-inter Edited by: KONS-nkes-mrie G:\BA-187970-INTER_GSX 5-10.DOC
14
3 | Technical specifications
The water softener Weichwassermeister
®
GSX is a twin system for a continu-
ous soft water supply. It is equipped with a central control valve for both ex-
changers and features volume control. The regeneration is released when the
pre-set water volume in an exchanger tank has been softened. If the pre-set
amount of water between two regenerations is not consumed within 4 days
after the last regeneration, the system starts a forced regeneration (as per DIN
19636-100). Raw water is used to regenerate the system.
All system data is shown in table C-1. The information applies to the
standard version of the system. Different data for special versions will be
provided separately, if applicable.
Warning!
Extended periods of standstill may cause bacterial growth in the
drinking water. The automatic regeneration counteracts this effect. There-
fore, do not disconnect the system from water and power supply when
you are absent for longer periods of time.
Attention!
Electrically operated valves. In case of power failure during
regeneration, water may flow into the drain or brine tank. Check the sys-
tem and shut off the water supply (if necessary) in case of power failures.
Fig. C-3: Dimensional drawing of Weichwassermeister
®
GSX
