background image

 

Water Softener

Weichwassermeister

®

 GSX 5, GSX 10, GSX 10-I

 
 

 

 

Order no. 075 187 970-inter   Edited by: KONS-nkes-mrie G:\BA-187970-INTER_GSX 5-10.DOC  

7

 

4 | General safety information 

4.1  Symbols and  

notes 

Important notes in this operation manual are characterised by symbols. 
Please pay particular attention to these notes in order to ensure a dan-
ger-free, safe and productive system operation.. 

Danger!

 Failure to adhere to these notes will cause serious or life-

threatening injury, extreme damage to property or inadmissible con-
tamination of drinking water. 

Warning!

 Failure to adhere to these notes may cause injury, damage to 

property or contamination of the drinking water. 

Attention! 

Failure to adhere to these notes may result in damage to 

the system or other objects.

 

 

Note:

 This symbol characterises notes and tips to make your work easier. 

Tasks with this symbol may only be performed by Grünbeck's technical 
service or by persons expressly authorized by Grünbeck. 

Tasks with this symbol may only be performed by personnel instructed 
in electrical engineering according to the VDE guidelines or according 
to the guidelines of a similar local institution. 

Tasks with this symbol may only be performed by the local water works 
or an approved installation company.  

 

4.2 Operating  

personnel 

Only persons who have read and understood this operation manual are 
permitted to work with the system. The safety guidelines must be strict-
ly adhered to. 

 

4.3 Designated  

application 

The system may only be used for the purpose outlined in the product 
description (chapter C). The present operation manual as well as the 
guidelines stipulated therein and the applicable local guidelines con-
cerning the drinking water protection, accident prevention and occupa-
tional safety must be adhered to. In addition, appropriate application 
implies that the system may only be operated when it is in proper work-
ing order. Any malfunctions must be repaired at once. 

 

Содержание Weichwassermeister GSX 10


























































Отзывы: