Water Softener
Weichwassermeister
®
GSX 5, GSX 10, GSX 10-I
Order no. 075 187 970-inter Edited by: KONS-nkes-mrie G:\BA-187970-INTER_GSX 5-10.DOC
37
2.4 How to release a manual regeneration
Start the regeneration in the basic display „time“:
Press the key for at least 5 seconds. The water softener starts the
regeneration and „
REG.“
is indicated in the display.
A manual regeneration must be released if
the water softener is operated in operating mode b 1 (regeneration
exclusively via daily interval and time) and the maximum soft water
volume is reached prior to the set regeneration interval has expired.
the water softener is restarted after a longer period of standstill (as
an alternative: , Index 9, menu item, twin regeneration).
maintenance or repair work has been done.
the raw water hardness has increased, in particular, if the water sof-
tener does not produce the desired soft water quality during the en-
tire filter operation.
Note:
In this case, the increased raw water hardness must be readjusted
in the control unit (refer to chapter F, paragraph 2.2).
