Grizzly G0820 Скачать руководство пользователя страница 5

Страница: 5 / 104

Model G0820 (Mfd. Since 12/16)

-3-

Identification

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.

A. Crosscut Fence. Used during crosscutting

operations to keep panels at 90˚ angle to
blade. Features a scale and flip stop.

B. Flip Stop. Used for quick, precise measure-

ments for repeatable cuts when using cross-
cutting fence.

C. Edge Shoe. Used with hold-down, keeps

the other end of workpiece secured to sliding
table.

D. Sliding Table. Ball-bearing rollers make it

quick and easy to guide large, heavy panels
through cut.

E. Blade Guard. Fully enclosed, adjustable

blade guard maintains maximum protection
around saw blade with a 2

⁄

" dust port

that effectively extracts dust from cutting
operation.

F. Hold-Down. Quickly clamps one end of

workpiece to sliding table.

G. Rip Fence. Fully adjustable with micro-adjust

knob for precision cuts. Fence face can be
positioned for standard cutting operations, or
placed in lower position for blade guard clear-
ance during narrow ripping operations.

H. End Plate with Handle. Used to move slid-

ing table during cutting operation.

I. Push Handle. Used to move sliding table

during cutting operation.

J. Crosscut Table. Provides a wide, stable

platform for supporting full-size panels during
crosscutting operations.

Содержание G0820









































































































Результаты поиска

Содержание G0820

Отзывы:

Grizzly G0820, Руководство пользователя, Страница: 5 / 104

Результаты поиска

Содержание G0820

Отзывы: