Grizzly G0819, Руководство пользователя

Страница: 47 / 84

Model G0819 (Mfd. Since 09/16)
-45-
Tools Needed: Qty
Phillips Screwdriver #2 ...................................... 1
Fine Ruler .......................................................... 1
Open-End Wrench 14mm .................................. 1
Hex Wrench 4, 5mm ....................................1 Ea.
To check/replace brake pads:
1.
DISCONNECT MACHINE FROM POWER
!
2. Disconnect machine from air, then release
all air pressure in machine by opening air
valve on regulator (see
Figure 65). This will
cause disc brake assembly to open, allowing
removal of the assembly.
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
The disc brake assembly uses brake pads to
stop the rotor (see
Figures 63
–
64
) when the
Emergency Stop button or Emergency Stop plate
is pressed. Eventually the brake pads will wear
out.
Checking and replacing these is a simple pro-
cedure that can be done in the shop, with
the exception of having the rotor resurfaced on
a lathe
. Contact Grizzly Customer Service at
(570) 546-9963 to order replacement brake pads
(Part #P08190212) .
Figure 63. Location of disc brake assembly
(lower right access panel removed for access).
Disc Brake
Assembly
Rotor
Figure 64. Locations of brake pads on disc
brake assembly.
Outer Brake Pad Inner Brake Pad
3. Remove lower right access panel.
Figure 65. Air supply disconnected, and air
valve opened for brake service.
Air Valve Open
(in Down Position)
Air Supply
Disconnected
Checking/Replacing
Brake Pads