Grizzly G0819, Руководство пользователя

Страница: 49 / 84

Model G0819 (Mfd. Since 09/16)
-47-
8. Remove (1) M6-1 x 25 flat head cap screw,
diaphragm plate, compression spring, bush-
ing, and left brake pad (see
Figures 71–72
).
Note:
Be careful when removing these com-
ponents. They are under pressure from the
compression spring (see
Figure 72), and
could fly apart unexpectedly.
9. Install new left brake pad in reverse order
from Step 8 . Make sure to re-install compo-
nents in same order and orientation as they
came from factory (see
Figure 73 ).
Note: The countersunk end of the bushing
faces the diaphragm plate (see
Figure 73).
10. Install new right brake shoe in reverse order
from Step 7 .
11. Re-assemble and install disc brake assembly
in reverse order from
Steps 5–6.
12. Re-install lower right access panel.
13. Reconnect air line.
14. Start sander and test Emergency Stop sys-
tem to make sure brake works.
Figure 71. Location of diaphragm plate and
mounting screw, and left brake pad.
Figure 73. Order of assembly for left brake pad
components.
Left
Brake
Pad
Diaphragm
Plate
x 1
Figure 72. Location of disc brake assembly
compression spring and bushing.
Compression
Spring
Bushing
Countersunk
End of Bushing
Faces
Diaphragm
Plate
Diaphragm
Plate