Grizzly G0819, Руководство пользователя

Страница: 51 / 84

Model G0819 (Mfd. Since 09/16)
-49-
4. Place wood block on edge of table, at rear left
corner, then raise table until wood block just
touches upper frame (see
Figures 76–77).
Do not allow table to squeeze or compress
wood block.
Note: Make sure wood block does not touch
conveyor belt (see
Figure 77).
5. Take precise measurements at each of the
three remaining corners, between the con-
veyor table and the upper frame (see
Figures
78–79).
Note: When measuring at front right and
left corners, measure from the upper frame;
DO NOT measure from the safety plate
(see
Figure 79).
Figure 76. Wood block placed at rear left corner
of conveyor table to check table parallelism.
Figure 77. Position of wood block on conveyor
table.
Wood Block
Located at Rear
Left Corner
Figure 78. Rear right measurement location for
checking table parallelism.
Figure 79. Front measurement locations for
checking table parallelism.
Measure Between
These 2 Points
Frame
Do Not
Measure from
Safety Plate