Grizzly G0772, Руководство пользователя, Страница: 57 / 124

Model G0772 (Mfd. Since 05/15)
-55-
3. Loosen crosscut table lock lever (Figure 106).
4. Position crosscut table along sliding table to
desired position, then re-tighten lock lever to
secure table.
Rip Cutting
The Model G0772 has the capability of rip cutting
large panels (see
Figure 107). The sliding table
removes the burden of sliding a large and heavy
panel over a stationary table surface.
Crosscut
Fence
Workpiece
Figure 107. Rip cut with sliding table and
crosscut fence.
This saw also has the capability of rip cutting
smaller boards, using the machine as a traditional
table saw (see
Figure 108). Smaller, lighter boards
are easier to slide across the stationary cast iron
table surface to the right of the saw blade.
Rip
Fence
Workpiece
Figure 108. Traditional rip cut with rip fence.
Determine which cutting operation will be best
suited for the workpiece to be ripped.
• To use the sliding table, read the instructions
titled “Rip Cutting with Sliding Table.”
• To use the machine as a traditional table saw,
skip ahead to “Rip Cutting with Rip Fence.”
Figure 106. Location of crosscut table lock lever.
Crosscut Table
Lock Lever