manualshive.com logo in svg

Grizzly G0772, Руководство пользователя, Страница: 13 / 124

Поделиться
Скачать
Grizzly G0772 Скачать руководство пользователя страница 13

Model G0772 (Mfd. Since 05/15)

-11-

The information contained herein is deemed accurate as of 12/3/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 3 OF 3

Model G0772

Construction Materials

Table.................................................................................................................................................... Cast Iron

Sliding Table....................................................................................................................................... Aluminum

Extension Table.......................................................................................................................................... Steel

Cabinet....................................................................................................................................................... Steel

Rip Fence........................................................................................................................................... Aluminum

Miter Fence......................................................................................................................................... Aluminum

Rip Fence Rails.......................................................................................................................... Chromed Steel

Guard....................................................................................................................................................... Plastic

Spindle Bearing Type.................................................................................... Sealed & Permanently Lubricated

Cabinet Paint Type/Finish.................................................................................................................... Urethane

Other Related Information

No of Dust Ports............................................................................................................................................... 2

Dust Port Size.......................................................................................................................................... 3, 5 in.

Other Specifications:

Country of Origin .............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time ............................................................................................................. 5 Hours

Serial Number Location .................................................................... ID Label on Right Side of Electrical Control Box

ISO 9001 Factory .................................................................................................................................................... No

Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No

Features:

Cross-Slide Table with Eccentric Locking Clamp and Hard Chrome-Plated Slideway

Easily Adjustable Saw Guard with Built-In Dust Hood

Miter Fence Adjustable 30 Degrees Left and 45 Degrees Right

Push-Button Digital Control of Blade Speed, Height Adjustments, Blade Tilt, and Scoring Blade Alignment

Scoring Blade Virtually Eliminates Tear-Out

Sliding Table on Vertical Guide System with Precision Bearing Rollers

Accepts 12" and 14" Blades

Содержание G0772





























































































































Отзывы:

Нет отзывов