Grizzly G0772, Руководство пользователя, Страница: 33 / 124

Model G0772 (Mfd. Since 05/15)
-31-
30. Position crosscut swing arm so it is perpen-
dicular to sliding table (see Figure 38).
Figure 38. Crosscut swing arm perpendicular to
table.
Swing Arm
31. With assistance from other people, place
crosscut table on swing arm pivot pin, and
slide crosscut table onto sliding table rail, as
shown in
Figure 39.
32. Loosen lock knob (see Figure 40) to loosen
cross support hold-down, slide long cross-
cut table support bar onto hold-down, then
tighten lock knob and install end caps.
Figure 40. Crosscut support bar components.
Long Support
Bar
33. Loosen pre-installed hex bolts on crosscut
table. Slide small support bar onto hold-
downs (see
Figure 41), tighten both hex
bolts, then install end caps.
Swing Arm
Pivot Pin
Figure 39. Attaching crosscut table to sliding
table rail and swing arm pivot pin.
Crosscut
Table
Hold-Down
Lock Knob
Figure 41. Short crosscut support bar installed.
Hold-Down (1 of 2
Short Support
Bar
Guide Pin
34. Unlock crosscut fence lock handles (see
Figure 42), insert guide pins on bottom of
crosscut fence into front or rear crosscut
table holes, then tighten lock handles.
Figure 42. Mounting crosscut fence to crosscut
table in front table holes.
Guide Pin
Lock Handles
Table
Hole
Table
Hole
Crosscut Table
Sliding Table
Rail